Menu
(FM115609XX/FM115709XX)
Bottle Coolers | Display Cases | Merchandisers
| Rated voltage | 120 / 230VAC (+/-10%), 50/60Hz |
| Temperature range | -40°C to +50°C |
| Rated current | 0.29 / 0.25A |
| Efficiency | ≤ 5% |
| Output power | 0 – 10W |
| Rated speed | 400 to 2300rpm (+/-1%) |
| Speed selection | 3 discrete programmable speeds. |
| Direction of rotation | CCW, CW, reverse on start |
| Motor protection | Electronically Protected (EP) |
| Ground protection | Double Insulation |
| Insulation Class | Class B |
| Bearing | 608 sealed ball bearings |
| Approvals | UL / TÜV / CE / RCM / CCC / ATEX* |
| Ingress protection | IP66 |
| Hydrocarbon Compatibility* | EN60335-2-89 ANNEX BB / ATEX |
- Secure rear mount with 4.1mm self tapping screw;
- 3 or 4 hole configuration available;
- Screws available on request.
- Optional foot mount with 25.4 or 28.6mm distances;
- M4 screws.
- 4 side studs for basket mount.
- Three speeds, programmable;
- Timed reverse;
- Control fans using standard off -the-shelf controllers speed via PWM/Voltage/Current. Allows you to fully customize by setting your own desired parameters;
- Select torque or speed control modes;
- Data acquisition available.
- M4 screw with flat washer on female shaft thread or M / 10–32 UNF nut on male shaft thread.
4 stud impeller mount to suit imperial or metric impellers.
“We develop platforms that are customisable to the core. We are fully invested in our customers’ success, and our greatest strengths are on display when we engage in collaborative engineering programs with our valued customers.”